Whole-home duct cleaning
Dryer vent cleaning
Camera inspection
Sanitizing & deodorizingWhole-system duct and dryer vent check with before-and-after photos - you see exactly what came out of your vents
That "$99 whole-house special" is a bait ad - the real number appears once they are in your hallway, or the "clean" is a shop-vac at the register. We photograph the inside of your ducts before and after instead.
Fast, Reliable Duct Sealing Across Sachse
Leaky ducts in Sachse homes typically waste 20 – 30% of conditioned air, driving up July and August electric bills while pulling attic dust into your living spaces. A full duct sealing job in Sachse runs $850 – $2,400 depending on home size, number of systems, and accessibility. Our crews know the neighborhoods, the construction patterns, and the failure points specific to Collin and Dallas County homes. Call (361) 309-6223 and we’ll inspect your ducts, show you the leaks on camera, and write the price down before any work starts.
We’re Duct Sealing specialists serving Sachse with uniformed, background-checked technicians. Roy Castellanos leads our team, and every job is covered by the 365-Day Done Right Promise in writing.
Why Hollis Air Duct Dallas Is Sachse’s Preferred Duct Sealing Company
Sachse homeowners call us because we answer the phone with a live person every time, and because the price we quote on the phone is the price on the invoice. We’re part of the Garrison Partners family, founded in 2004, and we operate under The Garrison Standard: arrive inside the window, price in writing, complete the job by the book, leave the site clean. No bait-and-switch, no pressure close.
Our techs navigate Sachse daily, from the Woodbridge subdivision to Heritage Park and the corridor along Highway 78. We understand the post-2000 housing stock here. Two-story homes with central HVAC in unconditioned attics create the same leak patterns we find week after week. When we give an estimate in Sachse, we’re pricing the exact conditions we know exist in your neighborhood, not guessing from across the metroplex.
Every Hollis technician is background-checked and uniformed. That matters when someone is in your attic for four hours. And the 365-Day Done Right Promise means if a sealed joint fails inside a year, we return and fix it at no charge. That’s not a verbal handshake. It’s in writing on every job we do in Sachse.
Styles & brands we work with




Duct Repair in Sachse
Duct repair in Sachse homes built after 2010 often means fixing what the original builder left behind: kinked flex runs, disconnected takeoffs, and joints that were never sealed with anything more than tape that’s now peeling in the attic heat. We use camera inspection to find the failure, then repair it with mastic and fiberglass mesh, reconnect flex duct, and verify airflow at the register. Repair work in Sachse typically runs $350 – $1,200 depending on how many joints and runs are compromised. Most repairs are completed same-day once we’re on site.
Disconnected Joints and Collar Failures
In Sachse’s unconditioned attics, summer temperatures climb past 140°F. That heat breaks down tape adhesive and causes metal collars to shift as the house thermally expands. The result is a supply trunk that separates at a takeoff collar, pushing conditioned air into the attic instead of your hallway. We find this most often in two-story homes where long trunk lines run through blown-in insulation.
Crushed or Kinked Flex Runs
Builders install flex duct quickly, and a kinked run hidden behind drywall is invisible until symptoms show up: one room that never cools, a spike in static pressure, louder airflow at other registers. Our techs identified a crushed 8-inch run in a Sachse home off Miles Road that reduced airflow to a second-story bedroom by almost half. Repair meant replacing the damaged section and sealing the joints properly. That’s duct repair, not duct replacement.
Air Duct Sealing in Sachse
Air duct sealing in Sachse is the process of closing every seam, joint, and connection in your duct system so conditioned air goes where it’s supposed to: into your rooms, not your attic. For homes east of Highway 78 with flex duct in unconditioned attics, sealing typically costs $1,200 – $2,400 for a full system, including a two-story home with two zones. The job involves mastic application at every accessible joint, reconnection of separated components, and pressure testing or visual verification at the air handler afterward.
Mastic Sealing at Every Accessible Joint
The right material matters. We use a duct sealing mastic, which is a thick paste that cures into a flexible rubber-like barrier, not the foil tape that degrades in Sachse’s attic heat. Our techs apply it with a brush at every takeoff, elbow, and trunk connection we can reach. Cured mastic moves with the house instead of peeling away.
Sealing Returns That Suck From the Attic
The return side of your system operates under negative pressure, which means every unsealed gap becomes an intake vent for attic air. In Sachse, that attic air is full of blown-in fiberglass and whatever the wind blows through the soffit vents. Sealing return ducts properly stops that infiltration at the source. When we finish, we verify pressure at the air handler and reset the blower motor so the system operates within spec.
Trusted Brands We Service in Sachse
We work on all major HVAC and ductwork brands found in Sachse homes, and we stock local parts for fast turnover. We also offer Sachse Dryer Vent Cleaning to keep your whole ventilation system safe. If we’re sealing joints on a Nikro negative-air system used for cleaning, we inspect the machine’s connections with the same standard we apply to your ducts. For filtration, we recommend and install products from Honeywell and Aprilaire where a system needs better particulate capture. Abatement Technologies equipment is part of our commercial-grade arsenal. We don’t sell brands you don’t need. We use what works, and we explain why in plain English before we touch anything.
See the difference
Before
After
Before
After
Before
AfterCommon Duct Sealing Problems We See in Sachse Homes
- Construction dust still circulating years after move-in. In newer subdivisions along Sachse’s east side, drywall dust and paint overspray from initial build-out remain inside return ducts, and any unsealed seam pulls more debris in. Sealing locks that cycle down.
- Mastic that cracked within five to seven years. Sachse attics hit 140°F in July and August. Factory-applied mastic from the builder degrades faster here than in cooler climates, leaving gaps at metal collars that should have held for decades.
- Insulation fibers drawn into supply runs. When blown-in insulation settles around a duct trunk, any exposed seam becomes an intake point when the system runs in cooling mode. The white specks you see on furniture aren’t just dust; they’re often fiberglass from your own attic.
- Long flex runs losing air at every turn. Two-story Sachse homes with central systems in unconditioned attics need long duct runs to reach second-story bedrooms. Each elbow and takeoff is a potential leak that adds up to a 20% airflow loss or more.
Pricing for Duct Sealing in Sachse, TX
Here’s what Sachse homeowners can expect to pay. A single-story home with accessible attic ductwork runs $850 – $1,400 for repair and sealing of the primary leaks. Two-story homes built after 2000 with flex duct and two zones run $1,500 – $2,400. Duct repair focused on one or two failed joints runs $350 – $800. What affects the number: home size, accessibility of the attic, how many joints need work, and whether returns need sealing in addition to supplies. We write the price down before any work starts. No per-vent pricing, no add-ons at the door. Call (361) 309-6223 for a free estimate specific to your Sachse home.
We Also Serve Cities Near Sachse
Our crews cover Duct Sealing in Sachse and the surrounding metroplex. If you’re in Garland, Rowlett, Richardson, or Dallas, call the same number: (361) 309-6223. We dispatch local crews to all of these cities with the same written-price standard and the same 365-Day Done Right Promise.
Serving Sachse, TX - Our Local Coverage Area
We’re based in the Sachse area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Duct Sealing in Sachse
Those white specks are most often blown-in fiberglass insulation from your attic, not construction dust. In Sachse homes east of Highway 78 built after 2010, unsealed return ducts and separated takeoff collars act as direct intakes for attic fibers. Sealing the joints and reconnecting any separated ducts stops the source. Where fibers have already accumulated in the supply side, cleaning before sealing removes what’s trapped. Call (361) 309-6223 and we’ll inspect your ducts on camera and show you exactly what you’re seeing.
Builder sealing often means a code-minimum pass with foil tape that fails in Sachse’s attic heat within a few years. Inspections in Collin County check for visible tape, not long-term airtightness. Mastic applied at initial install degrades in attics that hit 140°F every summer, and flex runs get kinked or crushed behind drywall during construction. A four-year-old home in Heritage Park with unconditioned attic ducts is exactly where we find separated joints and insulation being pulled into supply runs. Sealing now costs less than the energy loss you’re already paying for.
Yes. That fine gray dust is often attic air pulled in through unsealed return ducts and blown through your supply registers. When a system runs in cooling mode and the return side goes negative, every gap in the return pulls in whatever’s in the attic: fiberglass, dust, pollen that blew in through soffit vents. Sealing those return pathways stops the infiltration at the source. Homes in Sachse with two-story floor plans and long return runs in unconditioned attics see the most benefit.
If you see drywall dust, paint overspray, or fiberglass in your ducts, cleaning should come first. Sealing locks the system closed, so whatever debris is already inside stays inside and keeps circulating. For newer Sachse homes with construction debris from initial build-out, we recommend a full cleaning of the supply and return sides, then mastic sealing at every accessible joint. The order matters. We’ll advise you plainly after a camera inspection, and the price for each step is written before we start.
Typical leak rates in Sachse homes with flex duct in unconditioned attics run 20 – 30% of total airflow. That means for every $100 you spend cooling your home, $20 – $30 is cooling your attic. On a Sachse summer bill of $300 – $400, that’s $60 – $120 a month in wasted energy during peak season. Sealed ducts also reduce run times, which extends equipment life. Call (361) 309-6223 for a camera inspection and a written sealing quote.
Written by Roy Castellanos, Owner at Hollis Air Duct Dallas, serving Sachse with written pricing and the 365-Day Done Right Promise on every job.