Whole-home duct cleaning
Dryer vent cleaning
Camera inspection
Sanitizing & deodorizingWhole-system duct and dryer vent check with before-and-after photos - you see exactly what came out of your vents
That "$99 whole-house special" is a bait ad - the real number appears once they are in your hallway, or the "clean" is a shop-vac at the register. We photograph the inside of your ducts before and after instead.
Trane Air Duct Cleaning in Garland, TX | Hollis Air Duct Dallas
Trane air duct cleaning in Garland typically runs $450 to $900 for a full system, depending on the number of returns and whether flex duct repair or coil cleaning gets added to the job. We’re an independent Trane service provider, not a manufacturer-authorized dealer, and that independence means we tell you straight when a cleaning will fix the problem or when the real issue is a collapsed flex run or a fouled coil. Our crews work on Trane XR and XL systems in Garland most weeks, and we price the work in writing before anything gets touched. Call (361) 309-6223 for a free estimate.
Why Garland Residents Choose Us for Trane Service
Garland’s housing stock is mostly brick ranch and one-story homes from the 1960s through the 1980s, and a lot of those houses still run their original Trane equipment or a replacement unit tied to ductwork that’s past its service life. We know those houses because we work in them constantly. Roy Castellanos, who owns Hollis Air Duct Dallas, completed his HVAC and Air Duct Cleaning - Garland training at Los Angeles Trade-Technical College before bringing his crew to North Texas, and he runs jobs the same way whether it’s a 1972 ranch in Camelot or a newer build near Firewheel. The crew doesn’t upsell, doesn’t invent problems, and the invoice matches the estimate. If your Trane system moves air through attic flex that’s seen forty Texas summers, we’ll tell you what’s actually wrong before we quote a fix.
Every job gets a written price before work starts. Every job is covered by our 365-Day Done Right Promise: if the work fails within a year, we come back and make it right at no charge, including a free second visit. Technicians are background-checked, uniformed, and they answer to the Garrison Standard: arrive inside the quoted window, price in writing, complete the job by the book, leave the site clean. You’ll also get a live person on the phone any hour of the day. That matters when you’re trying to figure out whether the dust blowing out of your supply registers is a dirty duct or a disintegrated flex liner.
Styles & brands we work with
Common Trane Air Duct Cleaning Problems We Solve in Garland
- Blower wheel buildup on Trane Hyperion air handlers. Garland’s fine clay dust is brutal on variable-speed blowers. The Hyperion’s blower wheel picks up a packed layer of silt and pollen through the return side, airflow drops, and the system pushes whatever gets past into your duct runs. We pull the blower assembly, clean the wheel, and rebalance before any duct cleaning starts.
- Evaporator coil fouling on Trane XR and XL systems. Pollen, construction dust from 1960s-80s remodels, and decades of pet dander collect in the coil fins. That’s the musty smell coming through your supply registers. Cleaning the ducts without touching the coil leaves the odor right where it started.
- Collapsed original flex duct attached to Trane plenums. Attic temperatures in Garland climb past 140°F in August. The gray flex from the 1970s breaks down internally, the inner liner collapses, and airflow chokes. This is a repair, not a cleaning, and we’ve pulled dozens of these runs off Trane plenums in Northlake and Camelot homes.
- Trane CleanEffects cells loading faster than they should. Storm season in Garland kicks up fine particulates that clog CleanEffects cells quickly. When the cell is saturated, it stops capturing and starts letting contaminants back into the airstream. We pre-clean or remove the cells before duct work so we’re not recirculating what you’re paying us to remove.
- Duct boots pulling loose from slab heave. The Blackland Prairie clay under Garland expands and contracts with moisture, and slab movement transfers up through the return plenums. Loose boots invite attic insulation and dirt into the system, which then coats the blower, the coil, and the inside of every supply run.
Trane Service in Garland: What Local Conditions Mean for Your Equipment
Garland sits on the Blackland Prairie’s expansive clay, and that’s not just a geology footnote. The same soil heave that cracks slab foundations in neighborhoods like Camelot also pulls Trane supply plenums away from duct boots. A half-inch gap at a boot is wide enough for blown-in fiberglass, attic dust, and whatever else lives up there to get pulled straight into your return side. A duct cleaning alone cannot fix that. You can clean every run in the house and have the system pulling dirty air again within a week because the joint is still open. When we find a separated boot or plenum connection, we re-seal it with mastic before cleaning proceeds. That’s the difference between a cleaning that holds and one that doesn’t in this city’s soil.
There’s another Garland-specific factor we see constantly. Homes built from the 1960s through the 1980s often have attic-mounted Trane air handlers connected to flex duct that has never been replaced. A tech pulled a collapsed 1970s gray flex duct off a Trane XR14 air handler in a Northlake ranch not long ago. The inner liner had disintegrated from attic heat, and blown-in fiberglass was packed into the return plenum. We replaced the entire flex run with R-8 insulated duct, sealed the boot with mastic, then cleaned the blower and coil before rebalancing airflow. That’s what our Dryer Vent Cleaning in Garland and full service calls look like in this older housing stock.
Trane Models & Products We Service in Garland
We service the Trane lines most common in Garland homes: the XR Series condensers and heat pumps (XR14, XR16), the XL Series (XL16i, XL18i), Hyperion air handlers, and homes equipped with Trane CleanEffects whole-home air cleaners. If you want factory components, we’ll install OEM Trane filters and access panels when requested. For duct sealing, flex repair, and coil cleaning, we use commercial-grade aftermarket materials that meet Trane’s specifications, because that’s where the work actually lives. If a Trane coil is too far gone, we say so and don’t upsell a cleaning that won’t hold. This is independent service, not a Trane dealership, so the loyalty is to the homeowner and the system’s actual condition, not to a brand playbook. For broader Trane equipment needs, see our Trane sales & service page.
See the difference
Before
After
Before
After
Before
AfterTrane Service Pricing in Garland
Trane air duct cleaning in Garland runs from $450 to $900 for a complete system, with whole-system ranges depending on the number of returns, overall square footage, and whether repairs get added. Here’s how the work typically breaks down:
| Service | Typical Range in Garland |
|---|---|
| Full duct cleaning (up to 10 vents) | $450 – $650 |
| Each additional vent | $25 – $35 |
| Evaporator coil cleaning (Trane XR/XL) | $150 – $300 |
| Flex duct replacement (per run) | $200 – $450 |
| Duct sealing (mastic, per boot/plenum) | $75 – $150 |
| Trane CleanEffects cell cleaning | $90 – $150 |
The biggest cost driver is condition. A 1980s system with original flex and separated boots costs more to make right than a 10-year-old system that just needs cleaning. Our free estimate is a written, line-item price that doesn’t move after you approve it. Call (361) 309-6223 for an exact quote before you decide anything.
Serving Garland, TX - Our Local Coverage Area
We’re based in the Garland area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs – Trane Air Duct Cleaning in Garland
Cleaning alone won’t help if that original flex has collapsed internally, which is common in Garland’s attic heat. The inner liner breaks down, airflow chokes, and no amount of duct cleaning restores it. The honest sequence is: inspect the flex, replace what’s failed, seal the boots, then clean the system that’s now actually moving air. Call (361) 309-6223 and we’ll inspect before quoting anything.
In Garland, that usually means a disconnected or unsealed duct boot pulling attic dirt and insulation into the return side, or a blower wheel and coil loaded with clay dust that keeps recirculating what’s already in the system. A filter change can’t fix a gap at the plenum connection. We find and seal those gaps before cleaning so the dust stops at the source.
Every 2 to 3 years is realistic for a Hyperion in Garland, and more often if you have pets, run your system nearly year-round, or live near active construction. The variable-speed blower picks up fine material fast, and a loaded wheel means reduced airflow and more debris pushed downstream. We pull the blower assembly and clean it as part of a full system service.
In most cases the cell can be cleaned and put back into service. We pre-clean or remove CleanEffects cells before duct work so we’re not recirculating captured contaminants through a system we just cleaned. If a cell is damaged or beyond cleaning, we’ll show you and let you decide on replacement, with no upsell attached. Call (361) 309-6223 for a straight answer on your specific cell.
Yes, in almost every case where a musty smell is present in Garland. The coil is where pollen, construction dust, and decades of household debris settle, and that biological layer is what you’re smelling through the supply registers. Cleaning the ducts while leaving the coil fouled gets you half a job. We quote coil cleaning alongside duct work when the smell is a factor.
Service Areas Near Garland
Our crews cover Garland and the surrounding area, including Garland service area details for neighborhoods like Camelot, Northlake, and Firewheel. We also run Trane service into Trane service in Richardson, Trane service in Dallas, plus Rowlett, Heath, and DeSoto when the schedule allows.
Book Your Trane Service in Garland Today
We’ll inspect your Trane system, give you a written price, and do the work by the book. Clean ducts, straight answers – that’s the whole job. Call (361) 309-6223 for a free estimate.
Written by Roy Castellanos, Owner at Hollis Air Duct Dallas, serving Garland and surrounding areas.