Whole-home duct cleaning
Dryer vent cleaning
Camera inspection
Sanitizing & deodorizingWhole-system duct and dryer vent check with before-and-after photos - you see exactly what came out of your vents
That "$99 whole-house special" is a bait ad - the real number appears once they are in your hallway, or the "clean" is a shop-vac at the register. We photograph the inside of your ducts before and after instead.
Abatement Technologies Air Duct Cleaning in Dallas: What to Know First
Air duct cleaning on a system built around Abatement Technologies equipment in Dallas typically runs between $450 and $900 for a full residential system, and most jobs are completed in a single visit. We are an independent Abatement Technologies service provider, not a factory-authorized dealer, which means we answer to you and the work, not a corporate quota. If you own Abatement Technologies filtration or air-handling components and your ducts have never been cleaned, or it has been more than five years, call us at (361) 309-6223 for a written quote before anything gets touched.
How Abatement Technologies Products Fail – and How We Fix Them
- Abatement Technologies HEPA filtration units with loaded pre-filters. The pre-filter on Abatement Technologies’ HEPA units is designed to catch coarse debris before it hits the main filter, but in Dallas, that pre-filter loads up fast with fine clay dust and pollen. When it does, static pressure climbs and the system works harder to move the same air. We clean the duct runs feeding these units first, then check the pre-filter condition. If the pre-filter is plugged, replacing it is cheaper than replacing the HEPA element it is protecting, and we will tell you that straight.
- Abatement Technologies portable air scrubbers pulling dirty return air. These are common in Dallas homes that had renovation work or smoke events. The scrubber’s intake side collects a mat of drywall dust, pet hair, and cooking grease within months. When the return air feeding the scrubber is dirty, the machine is essentially recirculating what you are trying to remove. Our fix is to clean the return side runs and the blower cabinet, then reset the filter stages in the correct order, pre-filter first, HEPA second, carbon last. We see that order wrong more often than you would believe.
- Abatement Technologies negative-air machines losing suction due to dirty duct connections. In Dallas, construction dust from the housing boom in neighborhoods like Lake Highlands and Frisco settles inside flexible duct collars and reduces airflow. A negative-air machine is only as good as the seal at the connection points. When suction drops, the temptation is to blame the machine. Most of the time it is a collar packed with gypsum dust. We pull the collars, clean them, and retape with mastic so the machine pulls the volume it was rated for.
- Abatement Technologies Vapor Lock and HEPA-AIRE series filter frames with bypass leaks. These units move serious air, and if the filter frame gasket gets brittle from Dallas attic heat, dirty air slips around the filter instead of through it. It is a simple thing that makes a unit look broken when it is not. We inspect the gasket material on every Abatement Technologies unit we service. If it is cracked or compressed flat, we replace the gasket while we are already in there, before we clean the supply and return runs.
- Abatement Technologies industrial HEPA vacuums with clogged hoses and exhaust filters. Dallas homeowners who bought these for post-renovation cleanup often do not realize the exhaust filter on the vacuum is a wear item. When it saturates, the vacuum starts spitting fine dust right back into the room. We clean the entire vacuum path, replace the exhaust filter if it is loaded, and check the hose for static-charge buildup, which makes dust cling to the inside walls and cut suction over time. It is a ten-minute check that saves you from a vacuum that looks like it works and does not.
Styles & brands we work with
Our Abatement Technologies Air Duct Cleaning Process
- 1
You call, a live person answers. We ask what system you have, what you are seeing or smelling, and when the ducts were last cleaned. No script, no handoff.
- 2
We confirm the written quote. The price is written down before the van rolls. That number does not move at the door, period. The Garrison Standard, which every Hollis Air Duct Dallas location runs on, requires pricing in writing before work starts.
- 3
We inspect the Abatement Technologies components first. Filter frames, connections, pre-filters, and the duct runs feeding the equipment. We look for bypass leaks and static pressure issues before we ever put a brush in a duct.
- 4
We clean the system with negative-air containment. A Nikro negative-air machine puts the ductwork under vacuum while our Rotobrush rotary system agitates and removes debris. The dust goes into the containment unit, not your living room.
- 5
We run a video inspection before and after. You see the inside of your ducts on screen. No mystery, no trust-me. If a section is not clean, we clean it again while the equipment is still set up.
- 6
You get the 365-Day Done Right Promise in writing. If something is not right within a year, we return and make it right at no charge. That includes a free second visit. The site is left clean, the equipment is verified, and the invoice matches the quote.
What Abatement Technologies Air Duct Cleaning Costs in Dallas
Straight numbers, no games. A full residential duct cleaning on a home with Abatement Technologies filtration runs $450 to $700 for a typical single-system home under 2,500 square feet. Larger homes with multiple returns or additional air-handler runs land between $650 and $900. Commercial spaces with Abatement Technologies negative-air machines or HEPA scrubbers are quoted per job after a site walk, but most fall between $900 and $1,500. What moves the price: the number of supply and return runs, accessibility of the equipment, how much debris has accumulated, and whether filter gaskets or pre-filters need replacement while we are in there. You get one flat price per system, in writing, before work starts. Call (361) 309-6223 for a free estimate.
See the difference
Before
After
Before
After
Before
AfterWhy Dallas Homeowners Call Hollis Air Duct Dallas for Abatement Technologies Work
Roy Castellanos runs this shop the way he was trained: methodical, no shortcuts, no upsell you did not invite. He completed his HVAC and air systems training at Los Angeles Trade-Technical College before the work brought him to Dallas, and he has been servicing homes from Oak Cliff to the Design District for years. His crew arrives in uniform, inside the quoted window, with the price already written down. We service Abatement Technologies equipment day in and day out, but our techs also work on Lennox, Trane, and Carrier systems, so we understand how the pieces fit together. The 365-Day Done Right Promise is not a marketing line. It is written on every job. If the work fails within a year, we come back and fix it at no charge. Clean ducts, straight answers – that is the whole job.
FAQs
No. Proper air duct cleaning with negative-air containment and rotary-brush agitation does not void an Abatement Technologies equipment warranty. What voids warranties is improper handling: using chemical sanitizers the manufacturer does not approve, damaging filter frames, or running equipment with missing filters. We follow OEM service guidelines and document the process with video so you have a record.
Most residential jobs are scheduled within a few days, and the cleaning itself is a same-day job for a standard single-system home. We do not pad the schedule with fake urgency. You will get a written arrival window and the technician will be inside it.
Because they are not quoting the same job. A low teaser price usually covers a limited number of vents, no negative-air containment, no video inspection, and no written guarantee. By the time the tech is at the door, the price has climbed. We give one flat price per system in writing before work starts, and that number holds.
We run a video inspection before and after, and you watch it. You see the inside of your supply and return runs on a screen, live, while the equipment is still set up. If a section is not clean, we clean it again. There is no ambiguity.
Every three to five years for most Dallas homes. If you have pets, recent renovation work, or live near heavy construction, every two to three years is realistic. The fine clay dust and pollen in this area load pre-filters and duct runs faster than most homeowners expect. Call (361) 309-6223 and we will give you a straight answer for your specific setup.
Get a Written Quote for Abatement Technologies Air Duct Cleaning in Dallas
Call (361) 309-6223 and a live person answers, day or night. We will ask about your system, give you a written price before any work begins, and stand behind the job for a full year under the 365-Day Done Right Promise. No pressure, no surprises, no invoice that looks different from the estimate.
Written by Roy Castellanos, Owner, Hollis Air Duct Dallas at Hollis Air Duct Dallas, serving Dallas and nearby areas.